Terrier Lifting Clamps provides a 5 year warranty on its lifting clamps. This warranty is
applicable to the original end user of the lifting clamps. Only if the clamp has been inspected,
checked and maintained by this instructions and by an official dealer. This warranty period
of 5 years is valid from the day of purchase, and is liable to all conditions and measurements
stated in this document.
Conditions
This warranty only covers failures of the lifting tools which is the consequence of production errors which occur during normal use. The warranty covers no wear to components such as pivots, cam assemblies, lock springs etc. Should there be any kind of failure within this guarantee period,the lifting tool will be replaced or repaired to insight of the producer. No warranty is given to clamps due to the following failures:
- Regular wear.
- Overload.
- Wrong and/or carelessly use.
- Damages.
- Not following procedures and measures.
- Hoisting differing material other then indicated on clamp or stated in the user-manual.
- Adapting and/or modifying of the Terrier clamp.
- The injudicious use of the clamp, and not succeeding all indications which are stated in the users manual.
- When maintenance and/or revision has not been carried out by an authorised Terrier distributor.
The producer is not responsible for incidental damage or damage due to useof the lifting tools as well as from violation of this guarantee manual.
Procedure safety inspection
All inspections and repairings must be written down in the maintenance diagram. This counts not only for your own inspections but also for inspections which are carried out by your authorised Terrier distributor. When the clamp is handed in for maintenance and inspection you always must provide the maintenance diagram.
Defective lifting clamps
When a form of wear or damage is indicated, you must take the following measures.
Conditions
This warranty only covers failures of the lifting tools which is the consequence of production errors which occur during normal use. The warranty covers no wear to components such as pivots, cam assemblies, lock springs etc. Should there be any kind of failure within this guarantee period,the lifting tool will be replaced or repaired to insight of the producer. No warranty is given to clamps due to the following failures:
- Regular wear.
- Overload.
- Wrong and/or carelessly use.
- Damages.
- Not following procedures and measures.
- Hoisting differing material other then indicated on clamp or stated in the user-manual.
- Adapting and/or modifying of the Terrier clamp.
- The injudicious use of the clamp, and not succeeding all indications which are stated in the users manual.
- When maintenance and/or revision has not been carried out by an authorised Terrier distributor.
The producer is not responsible for incidental damage or damage due to useof the lifting tools as well as from violation of this guarantee manual.
Procedure safety inspection
All inspections and repairings must be written down in the maintenance diagram. This counts not only for your own inspections but also for inspections which are carried out by your authorised Terrier distributor. When the clamp is handed in for maintenance and inspection you always must provide the maintenance diagram.
Defective lifting clamps
When a form of wear or damage is indicated, you must take the following measures.
- Take the lifting clamp out of use. (Note the date of failure of the lifting clamp)
- Try to recover the cause of the failure, for example (complete list is available in chapter 1): overload, wrong and/or carelessly use, etc.
- Return your lifting clamp (with the maintenance history) to your authorised Terrier distributor.
- If the lifting clamp has been revised / repaired by your distributor, you can safely use your clamp again. Please note this date in your maintenance chart.